How to remove foam from clothes at home

A large number of advantages, positive reviews and advantages has a building material - polyurethane foam. But if the builders see him as only a good side, then the hostesses have a different opinion. Having got on clothes, curtains, any fabric surface, to remove sealant becomes a problem, which creates a headache for women. Neither hand wash nor machine wash help in such cases. But before you dispose of the thing, try the following tips.

One of the key points of this process is speed i. measures should be taken immediately, while the foam is in an uncured state. That is why nail polish remover has an unreliable reputation as a foam cleaner.It really will not be useful to you if the sealant has already frozen or deeply absorbed into the fabric. But if you act immediately, then there are good chances to cope with the trouble.

Nail polish remover, gasoline (refined), acetone

1. Before proceeding to rub the stains, try to remove the upper layers of sealant with a knife (trowel, blade).
2. Then, it is necessary to check the effect of the agent on a small area of ​​tissue hidden from the eyes, for example, on the inside. Perhaps the fabric will be painted. If this does not happen, proceed.
3. Moisten a cotton pad in the fluid being applied and try to scrub the stain. You can pour a small amount of used funds on it, it will help speed up the process.
4. After the stain is removed, the product must be washed.

Chemical cleaners, aerosols, special pastes

1. If you plan to carry out repairs on your own, then be sure to buy a special cleaner together with a sealant in the hypermarket. It helps to clean the gun from the foam, and also helps to dissolve the sealant on the fabric.
2. Just as in the previous case, first try to mechanically clean the surface of the foam from the foam, as far as possible.
3. Applying a thick layer of used funds to the product, it must be left for half an hour.
4. After expose the thing re-mechanical cleaning, try to knead the damaged area well.
5. Then once again apply a layer of funds and also leave for half an hour, after the thing should be washed as usual.
6. When using an aerosol, you should strongly moisten the problem area and leave it for half an hour, then resort to the mechanical method and wash the contaminated thing.
7. Paste must also be applied in a thick layer and leave for the specified time. After the procedure, the product needs washing with a large amount of powder.

Medication - Dimexide

1. You can purchase at any pharmacy. The tool is a synthetic drug, the active substance, which is dimethyl sulfoxide. That it contributes to the dissolution of stubborn stains, such as, for example, superglue.
2. Try as much as possible to clean the clothes from the foam, scraping off its remnants.Blot the cotton pad with the preparation and apply the liquid on the contaminated place.
3. The tool takes 30 minutes to penetrate deep into the spots, then you can remove it and brush it in the direction of the fabric fibers.
4. The product also needs washing, after which the thing needs to be rinsed thoroughly.

Cold and sunshine

The effect of cold on the removal of such stains is checked by the housewives, repeatedly. This is the way to remove chewing gum from children's clothing.

1. The product soiled with foam for installation is placed in the freezer.
2. When the sealant has completely frozen it can be easily removed by hand.
3. The remaining contamination will disappear easily under the influence of nail polish remover or acetone.
4. Exposure to sunlight contributes to the destruction of the structure of the foam.
5. Clothing should be left in the sun for a long time, periodically removing the decaying contamination.

Vegetable oil

Heat three tablespoons of oil and apply them on a previously cleaned stain. It is necessary to wait about 5 minutes so that the area is completely saturated with oil.

Apply washing powder, and adding a little water, foam up. Then, using a cotton pad, wipe the stain thoroughly and lock the item.

Safety

There is a chance that after the first procedure to remove the stain, one way or another, it will remain. Then repeat the process again. But the best option would be if you do not let the sealant on the clothes. When working with similar materials, use old clothes so that the appearance of stains on it does not upset you.

Video: how to remove mounting foam from clothes